Mitsubishi Lancer Evo:

Link ECU G4X PlugIn Steuergerät Mitsubishi Lancer Evo 1 2 3

 

Artikelbeschreibung:

 

202-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

This ECU is designed for the EVO 1-3 4G63 engine. 

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Includes onboard 4 bar MAP sensor 
  • Air temp sensor highly recommended. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options 



Suitable applications: 

Mitsubishi EVO 1 1992-1994*

Mitsubishi EVO 2 1994-1995* 

Mitsubishi EVO 3 1995-1996*

*Chassis number for these cars should be CD9A or CE9A. 

Mitsubishi GSR 1.8L 4G62

 

G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

I/O Expansion Options
The following expansion connector inputs/outputs are provided: 
Expansion connector 1 
Gnd                Sensor Ground Only  
+5V                Low Current +5V Supply 
DI 9               Digital Input 
DI 8               Digital Input 
Volt 5             Analog 0-5V input 
Volt 6             Analog 0-5V input 
Temp 3             Temperature sensor input 
Temp 4             Temperature sensor input 

Expansion Connector 2  
Ign 5                Ignition 5 Auxiliary Output 
Ign 6                Ignition 6 Auxiliary Output 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output 
Volt 8               Analog 0-5V input 
Volt 9               Analog 0-5V input 
Volt 10              Analog 0-5V input 
Volt 11              Analog 0-5V input

1.089,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Link ECU G4X PlugIn Steuergerät Mitsubishi Lancer Evo 4 5 6 7 8

 

Artikelbeschreibung:

 

203-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

This ECU is designed for the EVO 4-8 4G63 engine. 

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Includes onboard 4 bar or 7 bar MAP sensor 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options 


Suitable applications:  

CN9A Lancer Evolution 4 

CP9A Lancer Evolution 5, 6 & 6.5 (TME) 

CT9A Lancer Evolution 7 

CT9A Lancer Evolution 8 (models with 4-plug ECU only) 

*Some EVO 8’s have a 3 plug ECU. These applications will need the EVO9X Link ECU

 

G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

I/O Expansion Options
The following expansion connector inputs/outputs are provided: 
The Mitsubishi Lancer Evolution IV - VIII plug-in ECU has two expansion connectors. 

Expansion connector 1:
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 7                Digital input 
DI 8                Digital input 
DI 9                Digital input 
Aux 4                Auxiliary Output 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output 

Expansion Connector 2 
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
Aux 9                EThrottle - can't be used as an Aux Out 
Aux 10                Auxiliary Output 
An Volt 6        Analog 0-5V input 
An Volt 7        Analog 0-5V input 
An Volt 9        Analog 0-5V input 
An Volt 10        Analog 0-5V input

1.549,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Link ECU G4X PlugIn Steuergerät Mitsubishi Lancer Evo 9

 

Artikelbeschreibung:

 

204-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

This ECU is designed for the EVO 9 4G63 engine. 

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Includes onboard 4 bar or 7 bar MAP sensor 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options 



Suitable Applications:  

CT9A Lancer Evolution 9, 2005-2007 

CT9A Lancer Evolution 8, 2003-2005 with 3 plug ECU ONLY 

Any EVO8 car with a 3 plug ECU will also require this ECU. 

 

G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

I/O Expansion Options
The following expansion connector inputs/outputs are provided: 
Expansion Connector 1: 
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 9                Digital Input 
DI 10                Digital Input 
Aux 11                Auxiliary Output 
An Volt 11        Analog 0-5V input 
An Volt 8        Analog 0-5V input 
An Temp 4        Temperature sensor input 

Expansion Connector 2:
Gnd               Sensor Ground Only  
+5V Out        Low Current +5V Supply 
Aux 9             EThrottle - can't be used as an Aux out 
Aux 10            Auxiliary Output 
An Volt 6        Analog 0-5V input 
An Volt 7        Analog 0-5V input 
An Volt 9        Analog 0-5V input 
An Volt 10        Analog 0-5V input

1.549,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Mitsubishi Galant:

Link ECU G4X PlugIn Steuergerät Mitsubishi Galant VR4

 

Artikelbeschreibung:

 

223-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

This ECU is designed for the Vr4 4G63T engine. 

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Includes onboard 4 bar or 7 bar MAP sensor.
  • Knock control not available on this ECU. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options. 


Suitable Applications:   

Mitsubishi Galant VR-4 E38A (1987-1992) with 4G63T engine  

Mitsubishi Galant VR-4 E39A (1987-1992) with 4G63T engine 

1G DSM with 4G63T engine Eclipse/Talon

 

G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

I/O Expansion Options
The following expansion connector inputs/outputs are provided: 

Expansion Connector 1 
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 6                Digital Input for switching functions. 
An Volt 5        Analog 0-5V input 
An Volt 6        Analog 0-5V input 
An Temp 3        Temperature sensor input 

Expansion Connector 2 
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
Aux 9                EThrottle - can't be used as an Aux out 
Aux 10                Auxiliary Output 
An Volt 6        Analog 0-5V input 
An Volt 7        Analog 0-5V input 
An Volt 9        Analog 0-5V input 
An Volt 10        Analog 0-5V input

1.089,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1