All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications

100% Authentic & Genuine Walbro/ TI Automotive E85 Racing In tank 450 LPH high pressure fuel pump with installation kit

TI Automotive Walbro F90000274 internal E85 HP RACING fuel pump plus Install kit

Installation kit  ( fuel strainer, fuel hose, harness pigtail, 2 clamps, 2 wire connectors

The F90000267 requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed. 

The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. 

Designed for high performance engines exceeding 750hp. 

Designed for E85 or Gasoline applications.

The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. 

This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's 20 percent higher than conventional pumps. SPECIFICATIONS 465 lph @ 40 psi and 13.5V (14.1 amps) in gasoline Outlet diameter: 10mm (3/8") Diameter (upper body) 39mm Diameter (lower body) 50mm

All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications

100% Authentic & Genuine Walbro/ TI Automotive E85 Racing In tank 525 LPH high pressure fuel pump with installation kit

TI Automotive Walbro F90000285 internal E85 HP RACING fuel pump plus Install kit

Installation kit  ( fuel strainer, fuel hose, harness pigtail, 2 clamps, 2 wire connectors

The F90000285 requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed. 

The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. 

Designed for high performance engines exceeding 900hp. 

Designed for E85 or Gasoline applications.

The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. 

This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's 20 percent higher than conventional pumps. SPECIFICATIONS 470 lph @ 40 psi and 13.5V (14.1 amps) in gasoline Outlet diameter: 11mm, Diameter (upper body) 39mm Diameter (lower body) 50mm

WB-F90000285

Walbro GSS250 190L Fuel Pump.

Working pressure equal to 6.5 bar, capacity 190 l/h 

Purpose: universal Walbro high pressure fuel pump for use in sports cars and tunings. 

While serial pumps at 5 bar are able to supply approximately 130 liters of fuel per hour, the Walbro pump has a capacity of 190 liters, which allows the pump to be used in 400 HP engines.

Designed for mounting in the tank.

WB-GSS250

Walbro GSS340 255L Fuel Pump Working pressure equal
to 6.5 bar, capacity 255 l / h Purpose: universal Walbro high pressure
fuel pump for use in sports cars and tunings. While serial pumps at 5 bar are 
able to supply approximately 130 liters of fuel per hour, the Walbro pump has a
capacity of 255 liters, which allows the pump to be used in 500 HP engines.
Designed for mounting in the tank.

WB-GSS340

Walbro GSS341 255L Fuel Pump Working pressure equal to 6.5 bar, 
capacity 255 l / h Purpose: universal Walbro high pressure fuel pump 
for use in sports cars and tunings. While serial pumps at 5 bar are able 
to supply approximately 130 liters of fuel per hour, the Walbro pump
has a capacity of 255 liters, which allowsthe pump to be used in 500 HP engines.
Designed for mounting in the tank.

WB-GSS341

Walbro F20000141 190L Fuel Pump.

Working pressure equal to 6.5 bar, capacity 190 l/h 

Purpose: universal Walbro high pressure fuel pump for use in sports cars and tunings. 

While serial pumps at 5 bar are able to supply approximately 130 liters of fuel per hour, the Walbro pump has a capacity of 190 liters, which allows the pump to be used in 400 HP engines.

Designed for mounting in the tank.

Specification:

• Fittings In (mm):- 8
• Fittings Out (mm):- 11
• Voltage DC:- 12
• Flow Ltr/Hr (Max):- 222
• Flow Ltr/Hr @ 3 Bar (44psi):- 168
• Flow Ltr/Hr @ 5 Bar (73psi):- 126
• Max Pressure:- 6.6
• Length (mm):- 120
• Diameter (mm):- 39.2

WB-F20000141

Dual channel turbine design for maximum efficiency under high pressure and high temperature applications

Made in USA by TI Automotive (parent company of Walbro)

100% Authentic & Genuine Walbro/ TI Automotive In tank 400 LPH high pressure fuel pump.

The F90000262  requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed. 

The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. 

Designed for high performance engines exceeding 700hp. 

Designed for Gasoline applications.

The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge.

WB-F90000262

Dual channel turbine design for maximum efficiency under high pressure and high temperature applications

Made in USA by TI Automotive (parent company of Walbro).

Set contains fuel pump and install kit.

100% Authentic & Genuine Walbro/ TI Automotive in tank 400 LPH high pressure fuel pump.

The F90000262  requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed. 

The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. 

Designed for high performance engines exceeding 700hp. 

Designed for Gasoline applications.

The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge.

WB-TIA400-2

Dual channel turbine design for maximum efficiency under high pressure and high temperature applications

Made in USA by TI Automotive (parent company of Walbro)

All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications

100% Authentic & Genuine Walbro/ TI Automotive E85 Racing In tank 450 LPH high pressure fuel pump with installation kit

TI Automotive Walbro TIA485-2 / F90000267 internal E85 HP RACING fuel pump plus Install kit

Installation kit  ( fuel strainer, fuel hose, harness pigtail, 2 clamps, 2 wire connectors

The F90000267 requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed. 

The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. 

Designed for high performance engines exceeding 750hp. 

Designed for E85 or Gasoline applications.

The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. 

This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's 20 percent higher than conventional pumps. SPECIFICATIONS 465 lph @ 40 psi and 13.5V (14.1 amps) in gasoline Outlet diameter: 10mm (3/8") Diameter (upper body) 39mm Diameter (lower body) 50mm

WB-F90000267

Dual channel turbine design for maximum efficiency under high pressure and high temperature applications

Made in USA by TI Automotive (parent company of Walbro)

Set contains fuel pump and install kit.

All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications

100% Authentic & Genuine Walbro/ TI Automotive E85 Racing In tank 450 LPH high pressure fuel pump with installation kit

TI Automotive Walbro TIA485-2 / F90000267 internal E85 HP RACING fuel pump plus Install kit

Installation kit  ( fuel strainer, fuel hose, harness pigtail, 2 clamps, 2 wire connectors

The F90000267 requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed. 

The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. 

Designed for high performance engines exceeding 750hp. 

Designed for E85 or Gasoline applications.

The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. 

This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's 20 percent higher than conventional pumps.

465 lph @ 40 psi and 13.5V (14.1 amps) in gasoline

Outlet diameter: 10mm (3/8")

Diameter (upper body) 39mm

Diameter (lower body) 50mm

WB-TIA485-2

Walbro GSS317 255L Fuel Pump

Working pressure equal to 6.5 bar, capacity 255 l / h

WB-GSS317

Walbro GSS342 255L Fuel Pump

Working pressure equal to 6.5 bar, capacity 255 l / h

WB-GSS342