Nissan 180SX 200SX Silvia:

Link ECU G4X PlugIn Steuergerät passend für Nissan 180sx 200sx S13 CA18DET & S14 Pre-Face SR20DET

 

Artikelbeschreibung:

 

216-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Designed for the SR20 and CA18 engines, that use the 76 pin Blue ECU Header.  

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • It includes an onboard 4 bar or 7 bar MAP sensor. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options. 

Suitable applications:  
Nissan S13 CA18DET 
Nissan 180SX CA18DET   
Nissan S14 (pre facelift) SR20DET 

G4X PlugIn Key Features (where applicable):

  • Up to 6D fuel and ignition mapping
  • Precision closed loop cam control (four cam, independent control)
  • Sequential fuel delivery
  • Digital triggering, all OEM patterns
  • OEM idle hardware supported
  • 5D boost control with three switchable tables
  • Motorsport features - antilag, launch, flat shift
  • Continuous barometric correction (on board)
  • CAN port
  • QuickTune - automated fuel tuning
  • Individual cylinder correction
  • USB tuning cable included
  • Stats recording into on-board memory
  • Gear compensations for spark, boost and fuel
  • Real time selectable dual fuel, ignition and boost maps
  • Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
  • Boost control referenced to gear, speed or throttle position
  • 512 mega bytes data logging memory
  • Staged injection
  • Knock with "windowing"



I/O Expansion Options:
The following expansion connector inputs/outputs are provided: 
Expansion Connector 1 
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 5                Digital Input 
DI 6                Digital Input 
DI 7                Digital Input 
An Volt 6        Analog 0-5V input 
An Temp 4        Temperature sensor input 
An Temp 3        Temperature sensor input 

Expansion connector 2  
Ign 5                Ignition 5 Auxiliary Output 
Ign 6                Ignition 6 Auxiliary Output 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output 
Volt 8                Analog 0-5V input 
Volt 9                Analog 0-5V input 
Volt 10                Analog 0-5V input 
Volt 11                Analog 0-5V input

1.899,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Link ECU G4X PlugIn Steuergerät passend für Nissan 180sx 200sx S13 S14a S15 Silvia Pulsar GTI SR20DET SR20DE

 

Artikelbeschreibung:

 

217-4000

 

Easy to install. Affordable. Reliable. 
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Designed for the SR20 engine. This ECU will work with the 64 pin, blue header plug ECU version. 

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • ECU includes an onboard 4 bar MAP or 7 bar MAP sensor. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options

Suitable Applications:  
S13 Silvia / 180SX SR20DET (but not CA18DET) 
S14a Silvia (facelift) SR20DET 
S15 Silvia SR20DET 
S15 Silvia SR20DE 
RNN14 Pulsar GTI-R SR20DET 
N15 Pulsar SR16VE 
N14 Distributed 
*For the 76 pin header ECU, have a look at the S13X PlugIn listing. 

G4X PlugIn Key Features (where applicable):

  • Up to 6D fuel and ignition mapping
  • Precision closed loop cam control (four cam, independent control)
  • Sequential fuel delivery
  • Digital triggering, all OEM patterns
  • OEM idle hardware supported
  • 5D boost control with three switchable tables
  • Motorsport features - antilag, launch, flat shift
  • Continuous barometric correction (on board)
  • CAN port
  • QuickTune - automated fuel tuning
  • Individual cylinder correction
  • USB tuning cable included
  • Stats recording into on-board memory
  • Gear compensations for spark, boost and fuel
  • Real time selectable dual fuel, ignition and boost maps
  • Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
  • Boost control referenced to gear, speed or throttle position
  • 512 mega bytes data logging memory
  • Staged injection
  • Knock with "windowing"


I/O Expansion Options:
The following expansion connector inputs/outputs are provided: 
Expansion connector 1  
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI6                Digital Input 
DI7                Digital Input 
An Volt 5        Analog 0-5V input 
An Volt 6        Analog 0-5V input 
An Temp 3        Temperature sensor input 
An Temp 4        Temperature sensor input 

Expansion connector 2 
Ign 5                Ignition 5 Auxiliary output 
Ign 6                Ignition 6 Auxiliary output 
Ign 7                Ignition 7 Auxiliary output 
DI 8                Digital Input 
Volt 8                Analog 0-5V input 
Volt 9                Analog 0-5V input 
Volt 10                Analog 0-5V input 
Volt 11                Analog 0-5V input

1.899,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Nissan 300ZX:

Link ECU G4X PlugIn Steuergerät passend für Nissan 300ZX Z32 VQ30

 

Artikelbeschreibung:

 

213-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

The N300X ECU is Designed to suit the VG30DET engine.  
 
  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Includes an onboard 4 bar or 7 bar MAP sensor. 
  • Most factory features are supported. 
  • It is highly recommended to fit an IAT sensor with this model.
  • Check the features tab for I/O expansion options. 

Suitable applications:  
Z32 300ZX VG30DE 
Z32 300ZX VG30DETT

G4X PlugIn Key Features (where applicable):
  • Up to 6D fuel and ignition mapping
  • Precision closed loop cam control (four cam, independent control)
  • Sequential fuel delivery
  • Digital triggering, all OEM patterns
  • OEM idle hardware supported
  • 5D boost control with three switchable tables
  • Motorsport features - antilag, launch, flat shift
  • Continuous barometric correction (on board)
  • CAN port
  • QuickTune - automated fuel tuning
  • Individual cylinder correction
  • USB tuning cable included
  • Stats recording into on-board memory
  • Gear compensations for spark, boost and fuel
  • Real time selectable dual fuel, ignition and boost maps
  • Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
  • Boost control referenced to gear, speed or throttle position
  • 512 mega bytes data logging memory
  • Staged injection
  • Knock with "windowing"

I/O Expansion Options:
The following expansion connector inputs/outputs are provided: 
Expansion connector 1 
GND                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 5                Digital Input 
DI 6                Digital Input 
Volt 8                Analog Volt Input 
Volt 7                Analog Volt Input 
Temp 3                Analog Temp Input 
Temp 4                Analog Temp Input 

Expansion Connector 2 
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output 
DI 7                Digital Input 
DI 8                Digital Input 
An Volt 9        Analog 0-5V input
An Volt 10        Analog 0-5V input

1.779,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Nissan 350Z:

Link ECU G4X PlugIn Steuergerät passend für Nissan 350Z Z33 VQ35DE

 

Artikelbeschreibung:

 

210-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU comes in its own enclosure, while installation is a breeze with no alteration of the factory wiring loom required for the models listed below. 

The N350X ECU is Designed to suit the VQ35DE engine. 

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works with manual AND automatic transmissions.  
  • ECU includes an onboard 4 bar or 7 bar MAP sensor.  
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options 
  • Highly recommended to fit an IAT sensor. 

Suitable applications:  
2002 to 2006 Nissan 350Z (Fairlady Z Z33) 
2003 to 2006 Nissan Skyline V35 
2003 to 2006 Infinity G35 

G4X PlugIn Key Features (where applicable):

  • Up to 6D fuel and ignition mapping
  • Precision closed loop cam control (four cam, independent control)
  • Sequential fuel delivery
  • Digital triggering, all OEM patterns
  • OEM idle hardware supported
  • 5D boost control with three switchable tables
  • Motorsport features - antilag, launch, flat shift
  • Continuous barometric correction (on board)
  • CAN port
  • QuickTune - automated fuel tuning
  • Individual cylinder correction
  • USB tuning cable included
  • Stats recording into on-board memory
  • Gear compensations for spark, boost and fuel
  • Real time selectable dual fuel, ignition and boost maps
  • Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
  • Boost control referenced to gear, speed or throttle position
  • 512 mega bytes data logging memory
  • Staged injection
  • Knock with "windowing"


I/O Expansion Options:
The following expansion connector inputs/outputs are provided: 
Expansion connector 1  
Gnd                Sensor Ground Only  
+5V                Low Current +5V Supply 
Aux 15                Auxiliary Output 
Aux 14                Auxiliary Output 
DI 8                Digital Input 
DI 9                Digital Input 
An Volt 8        Analog 0-5V input 

Expansion connector 2  
An Temp 4        Temperature sensor input 
DI 11                Digital Input 
Aux 16                Auxiliary Output 
Aux 8                Auxiliary Output 
+5V                Low Current +5V Supply 
Gnd                Sensor Ground Only 

1.779,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Nissan Skyline:

Link ECU G4X PlugIn Steuergerät passend für Nissan Skyline R34 GT GTT RB20 RB25 NEO & Stagea RB20 RB25 NEO

 

Artikelbeschreibung:

 

215-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

The NGTTX is Designed to suit the grey plug RB (typically neo) engine.  

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Most factory features are supported. 
  • Note, this ECU does not currently output the 4wd signal required for proper 4wd operation in 4wd Stageas and skylines. 
  • Check the features tab for I/O expansion options  


Suitable applications: 

RB20DE NEO, RB25DE NEO and RB25DET NEO in R34 Skylines

RB20DE NEO, RB25DE NEO and RB25DET NEO in C35 Laurels 

RB20DE NEO, RB25DE NEO and RB25DET NEO in Nissan Stageas

- Plus, non neo motors in Stageas

G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"


I/O Expansion Options:
The following expansion connector inputs/outputs are provided: 
Expansion connector 1  
SGnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 7                Digital Input 
DI 8                Digital Input 
An Volt 10        Analog 0-5V input 
An Volt 9        Analog 0-5V input 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output 

Expansion connector 2  
SGnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 5                Digital Input 
DI 6                Digital Input 
An Volt 5        Analog 0-5V input 
An Volt 6        Analog 0-5V input 
An Temp 2        Temperature sensor input 
An Temp 3        Temperature sensor input 

Pin 108 – OBD1 wire now used for IAT on Temp 4. 

1.899,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Link ECU G4X PlugIn Steuergerät passend für Nissan Skyline R32 GTST GTR, R33 GTST GTR, R34 GTR RB20DET RB25DET RB26DETT

 

Artikelbeschreibung:

 

214-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.  

The NGTRX is Designed to suit the blue plug Nissan RB engine.  

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • This model includes an onboard 4 bar or 7 bar MAP sensor. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options 

Suitable applications:  

RB26DETT engines found in R32, R33, R34 Skyline GTRs and Autech 260RS Stageas 

RB20DE engines found in R32 & R33 Skylines, A31 Cefiros  

RB20DET engines found in R32 Skylines (incl 4wd), A31 Cefiros and C33 Laurels. – Injector 4&6 need swapping 

RB25DE engines found in R32 & R33 Skylines, C33 & C34 Laurels and A31 Cefiros. 

RB25DET engines found in R33 Skylines (incl 4wd) and C34 Laurels 

RB30DE/DET/DETT engines made using Non Neo heads and blue plug looms

G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"
 
I/O Expansion Options:
The following expansion connector inputs/outputs are provided: 
Expansion connector 1  
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI5                Digital Input 
DI6                Digital Input 
An Volt 8        Analog 0-5V input 
An Volt 2        Analog 0-5V input 
An Temp 3        Temperature sensor input 
An Temp 4        Temperature sensor input 

Expansion connector 2 
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output 
DI 9                Digital Input 
DI 10                Digital Input 
An Volt 10        Analog 0-5V input 
Aux 11                Auxiliary Output 11

1.899,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1