Subaru Impreza GC8 Classic:

Link ECU G4X PlugIn Steuergerät passend für Subaru Impreza GC8 V1 V2 GT WRX STI EJ20 92-96

 

Artikelbeschreibung:

 

226-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Designed for the WRX V1-2 EJ20. 

  • Please check your pinoutconnector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Air temp sensor highly recommended. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options  


Suitable Applications: 
GC8A 
GC8B 
GC8C 
WRX and STI from 10/1992 to 8/1996
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"


The following expansion connector inputs/outputs are provided: 
Expansion connector 1  
Gnd                Sensor Ground Only  
+5V                Low Current +5V Supply 
DI 5                Digital Input 
DI 6                Digital Input 
Volt 5                Analog 0-5V input 
Volt 6                Analog 0-5V input 
An Temp 2        Temperature sensor input 
An Temp 3        Temperature sensor input 


Expansion connector 2  
Gnd                Sensor Ground Only  
+5V                Low Current +5V Supply 
DI 9                Digital Input 
DI 10                Digital Input 
Volt 8                Analog 0-5V input 
Volt 9                Analog 0-5V input 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output

1.299,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Link ECU G4X PlugIn Steuergerät passend für Subaru Impreza GC8 V3 V4 GT WRX STI EJ20 96-98

 

Artikelbeschreibung:

 

227-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Designed for the WRX V3-4 EJ20 

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Air temp sensor highly recommended. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options  

 
Suitable Applications: 
GC8D 
GC8E 
WRX and STI from 09/1996 to 08/1998
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

The following expansion connector inputs/outputs are provided: 
XS connector 1  
Gnd                Sensor Ground Only  
+5V                Low Current +5V Supply 
DI 5                Digital Input 
DI 6                Digital Input 
Volt 5                Analog 0-5V input 
Volt 6                Analog 0-5V input 
Temp 4                Temperature sensor input 
Temp 3                Temperature sensor input 

Expansion connector 2  
Gnd                Sensor Ground Only  
+5V                Low Current +5V Supply 
DI 9                Digital Input 
DI 10                Digital Input 
Volt 8                Analog 0-5V input 
Volt 9                Analog 0-5V input 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output

1.299,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Link ECU G4X PlugIn Steuergerät passend für Subaru Impreza GC8 V5 V6 GT WRX STI EJ20 98-00

 

Artikelbeschreibung:

 

228-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Designed for the WRX V5-6 EJ20. 

  • Please check your pinout matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.  
  • Air temp sensor highly recommended. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options  


Suitable Applications: 
GC8F 
GC8G 
WRX and STI from 09/1998 to 08/00 
MY99 & MY00
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

The following expansion connector inputs/outputs are provided: 
XS connector 1  
Gnd                Sensor Ground Only  
+5V                Low Current +5V Supply 
DI 5                Digital Input 
DI 6                Digital Input 
Volt 5                Analog 0-5V input 
Volt 6                Analog 0-5V input 
Temp 4                Temperature sensor input 
Temp 3                Temperature sensor input 

Expansion connector 2  
Gnd                Sensor Ground Only  
+5V                Low Current +5V Supply 
DI 9                Digital Input 
DI 10                Digital Input 
Volt 8                Analog 0-5V input 
Volt 9                Analog 0-5V input 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output

1.479,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Subaru Impreza New Age:

Link ECU G4X PlugIn Steuergerät passend für Subaru Impreza GD GG GDA GDB WRX STI EJ20 2.0L 01-07

 

Artikelbeschreibung:

 

229-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Designed for the WRX V7-9 EJ20 (GD/GG chassis, MY2000-2007 with cam control, 2.0L models only)

  • Please check your connector matches the header in the listed photo before purchasing. This ECU fits 5 Plug ECUs. 
  • This ECU works for manual transmissions only.  
  • Air temp sensor highly recommended. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options  

 
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

I/O Options:
The following expansion connector inputs/outputs are provided: 
Expansion connector 1  
Ign 6                Ignition 6 Auxiliary Output 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output 
DI 7                Digital Input 
DI 8                Digital Input 
DI 9                Digital Input
An Temp 4        Temperature sensor input 
An Volt 11        Analog 0-5V input 

Expansion connector 2  
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
Aux 9                EThrottle - can't be used as an Aux out 
Aux 10                Auxiliary Output 
Volt 6                Analog 0-5V input 
Volt 7                Analog 0-5V input 
Volt 9                Analog 0-5V input 
Volt 10                Analog 0-5V input

1.899,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Link ECU G4X PlugIn Steuergerät passend für Subaru Impreza GD GG GDA GDB WRX STI EJ25 2.5L 05-07 Hawkeye

 

Artikelbeschreibung:

 

225-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Designed for the WRX V10 EJ25. These ECUs cover 2.5L from 2005 to 2007 Hawkeye Models

  • Please check your connector matches the header in the listed photo and check the notes in italic below before purchasing.  
  • This ECU works for manual transmissions only.  
  • Air temp sensor highly recommended. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options  

Suitable Applications:
The WRX104X (listed separately) mostly covered the 2004-2006 range.
The WRX107X mostly covers the 2007 model.
 
However, some 2006 models require the WRX107X 
 
*The fastest and most reliable way to tell, is to check whether pins A1-3 are populated. 

*If the pins have wires, you need the WRX104X, if there are no wires, you need the WRX107X 

*Suits GD or GG chassis with electronic throttle.  Not suitable for the GR/GH/GE/GV hatchback or 3rd generation WRX’s
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

There are two different options for the expansion connectors, depending on whether your ECU is the 2004-2006 ECU or the 2006-2007 ECU. 

2004-2006 ECU 
The following expansion connector inputs/outputs are provided: 
Blank                AN Volt 11 
An Temp 4        Temperature sensor input 
Blank                No function 
Blank                AN Volt 12 
Blank                No function 
Blank                No function 
+5V Out        Low Current +5V Supply 
Gnd                Sensor Ground Only 


2006-2007 ECU 
The 2006-2007 V10 ECU contains an 8 pin expansion connector. 
The following expansion connector inputs/outputs are provided: 
Aux 11                Auxiliary Output 
An Temp 4        Temperature sensor input 
Aux 12                Auxiliary Output 
Volt 11                Analog 0-5V input 
Aux 13                Auxiliary Output 
DI 11                Digital Input 
+5V Out        Low Current +5V Supply 
Gnd                Sensor Ground Only

1.899,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1

Link ECU G4X PlugIn Steuergerät passend für Subaru Impreza GR/GV/GH/GE WRX STI EJ20 EJ25 08-11

 

Artikelbeschreibung:

 

238-4000

 

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Due to the amount of variation on this vehicle, please ensure you read the Configuration - Memo Text in PCLink.

Designed for the WRX & WRX STI V11 EJ20/EJ25 Turbo (GR/GV/GH/GE chassis, MY2007-2011, Denso ECU from factory). All factory functions including DCCD, hill start assist, SI drive, cruise control, cam control & ABS supported. 

Note: Supports North American models with Denso ECU from late 2007-2010 only. Some North American models have a Hitachi ECU which is not supported. Check with our tech support team if you are unsure.

  • Please check your connector matches the header in the listed photo before purchasing. 
  • This ECU works for manual transmissions only.  
  • Air temp sensor highly recommended. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options.

Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection.  Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices.  This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices.  The power supply is protected by a self-resetting fuse rated at 3A continuous.
G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

I/O Options:
The following expansion connector inputs/outputs are provided: 
Expansion connector 1  
Pin 1                Aux 16
Pin 2                DI 11
Pin 3                An Temp 4
Pin 4                Knock 2
Pin 5                Injector 6

1.899,00 €

  • Verfügbar/Available
  • 3 - 5 Tage Lieferzeit1